Serving the Eau Claire area  ·  (534) 444-6239  ·  Open Mon-Sat 7am-6pm
📞 (534) 444-6239 Free Quote

Spray Foam Insulation in Rice Lake, WI (54868) · Local Professionals

Eau Claire Spray Foam Insulation · Fast response in Rice Lake and the Eau Claire area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+28Verified Reviews
14Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Rice Lake sits on a foundation of full basements and older wood-frame homes built to survive Wisconsin winters, but not the kind of air sealing and insulation that modern heating costs demand. From the neighborhoods near the downtown core to the newer subdivisions spreading toward the county line, nearly every house in 54868 loses heat the same way: through rim joists where the foundation meets the band board, and through attics where warm indoor air rises and escapes into the cold roof plane, driving ice dams along the eaves every January.

Eau Claire Spray Foam Insulation has been sealing and insulating homes across Rice Lake and the surrounding Eau Claire area since 2012. We know the building stock here, the Chippewa River cold that settles against foundation walls, and the stack-effect moisture that rises through attics in this IECC zone 6A climate. When a heating bill becomes unaffordable, or a room over a garage never reaches temperature, or an attic shows damp insulation and condensation, we show up with a written estimate that names the R-value and thickness we're installing, and we get the job done right.

Spray Foam Insulation in Rice Lake (54868)

Rice Lake's housing stock runs from early-1900s bungalows and modest homes near downtown to mid-century ranches scattered across the residential areas, with newer subdivisions filling in toward the county line. Every one of them sits over a full basement, and that's where the insulation problem starts. Rim joists and band joists at the foundation top plate are the first weak point: cold air off the Chippewa River settles against the foundation walls each winter, and standard fiberglass batts in a rim joist cavity don't seal the air leaks that drive the cold inside. Attics carry the second major problem. In this cold climate, warm humid indoor air rises by stack effect, and where the attic plane is poorly sealed at top plates, ductwork penetrations, and soffit vents, that moisture meets cold roof sheathing and drives ice dams along eaves from the downtown neighborhoods to the newer streets on the edge of town. Wall cavities in older homes often carry whatever insulation they were built with, or nothing at all, and rooms over garages face the same temperature swings that make them uncomfortable and expensive to heat.

Our team has been serving Rice Lake and the surrounding Eau Claire area since 2012. We specialize in closed-cell and open-cell spray foam for attics and sealed roof decks, rim and band joist sealing, wall and injection foam retrofit, crawl spaces, and the removal and replacement of insulation that has failed or become contaminated. We're fully insured, and we deliver a written estimate with R-value and thickness specifications before any work begins.

Our services in Rice Lake

How a Job Works in Rice Lake

Step one is a free on-site assessment. We visit your home, walk the attic or crawl space, check the rim joists and band joists, and identify what needs to come out and what can stay. We ask about your heating and cooling bills, any rooms that never reach temperature, and any moisture or condensation you've noticed. We measure the square footage and the cavity depths, and we talk through open-cell versus closed-cell foam so you understand the difference and the cost of each. Then we deliver a written estimate that names the R-value we're installing, the thickness per pass, the total board feet, and the price.

Step two is the work itself. If old insulation has to come out first, we remove it and haul it away. We set up mechanical ventilation during the spray, because the foam off-gasses as it cures, and we respect the re-entry window of twenty-four to forty-eight hours before you and your family can occupy the space. If your attic is tight or your crawl space is cramped, we work with the space you have. If you're living in the house during the work, we coordinate around your schedule and make sure the ventilation is running and the doors are sealed.

Step three is cleanup and a final walkthrough. We leave your property clean, and we walk you through what we've installed, the R-value you're now carrying in each cavity, and how to maintain the work going forward. Any questions after we leave, you call us at (534) 444-6239.

Spray foam pricing in Rice Lake depends on the area to cover, the R-value and thickness you need, whether you're using open-cell or closed-cell foam, and what has to be removed first. Attic spray foam typically starts at $1.50 per square foot and covers the attic plane, rim joists, and top plates where air leaks drive heat loss. Closed-cell foam runs from $1.20 per board foot and is denser and more vapor-resistant, ideal for rim joists and band joists where moisture risk is high. Open-cell foam starts at $0.55 per board foot and is lighter and more cost-effective for attics where vapor drive runs inward. Wall and injection foam retrofit starts at $2 per square foot for closed cavities. Crawl space foam typically starts at $2,500 and includes the rim joist, band joist, and foundation walls. Rim joist and band joist sealing starts at $650 for a single-story home. Insulation removal runs from $950 depending on the volume and the condition of what's coming out. The biggest cost factors are the square footage of the attic or the linear feet of rim joist, the R-value and thickness specified in the code for your address, whether contaminated or damp insulation has to be removed first, and how tight the access is. Call us at (534) 444-6239 for a free estimate. We'll measure your space, walk you through the options, and give you a firm price in writing.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Rice Lake and nearby areas.

Why do so many homes in Rice Lake develop ice dams along the eaves every winter?
Ice dams form when warm air from inside the home rises into the attic, melts the snow on the roof, and the melt-water refreezes at the cold eaves. In Rice Lake's older homes and mid-century ranches, attics are poorly sealed at the top plates where the walls meet the roof, and ductwork and penetrations leak warm humid air directly into the attic cavity. In zone 6A, that warm air meets cold roof sheathing, the moisture condenses, and the roof stays warm enough to melt snow while the eaves stay below freezing. Spray foam seals the top plates, the rim joists, and the ductwork penetrations, so warm air stays inside the home and the roof stays uniformly cold. That stops the ice dams.
I see moisture and damp insulation in my Rice Lake attic. Can you spray foam right over it?
No. Wet or damp insulation has to come out before any foam goes in. Moisture trapped under new foam will stay trapped, and it will rot the roof sheathing and the framing underneath. We inspect the attic, identify where the moisture is coming from (usually a roof leak, poor ventilation, or air leaks from the living space below), and we either fix the source or we walk away. Once the attic is dry and any roof or vent issues are addressed, we remove the old insulation, haul it away, and then spray the foam. Call us at (534) 444-6239 to schedule an inspection.
What does spray foam insulation cost for an attic or rim joist job in Rice Lake?
Attic spray foam typically starts at $1.50 per square foot, and a 1,500-square-foot attic might run $2,000 to $3,500 depending on the thickness and R-value required by code. Rim joist and band joist sealing starts at $650 for a single-story home and can run higher for a two-story house or if old insulation has to be removed first. The exact price depends on the square footage, the R-value and thickness specified, whether you're using open-cell or closed-cell foam, and whether contaminated insulation has to come out before we spray. Call (534) 444-6239 for a free on-site estimate.
Who enforces the R-value and insulation code requirements in Rice Lake, and do I need a permit?
Wisconsin's energy code and building code set the R-value and thickness requirements for attics, walls, and rim joists based on the climate zone and the building use. The local building official in Barron County enforces those requirements and inspects the work. Permit requirements vary by city and by the scope of work, so we help you navigate what applies at your address. Check with the official city site at https://www.barroncountywi.gov or your local building department to confirm whether your project requires a permit. We'll provide the written estimate with R-value and thickness so the inspector knows exactly what we're installing.
Can we live in the house while you're spraying foam in the attic?
Yes, but with conditions. During the spray and cure, mechanical ventilation has to run to clear the off-gassing foam, and we seal the attic access so the fumes don't enter the living space. We ask you to stay out of the attic during the work and for the re-entry window of twenty-four to forty-eight hours after we finish. If you have young children, elderly family members, or pets with respiratory sensitivity, let us know so we can coordinate the timing. The smell dissipates as the foam cures, and once the re-entry window closes, the space is safe to use.
Are you insured for spray foam work in Rice Lake?
Yes. We carry full general liability and workers' compensation insurance. Before any work begins, we'll provide proof of insurance so you know you're protected if anything goes wrong on your property. If you're hiring a contractor for spray foam or any insulation work, always ask for proof of insurance and verify the coverage directly with the carrier.
When is the best time to schedule spray foam insulation work in Rice Lake?
Winter heating bills are the urgency in Rice Lake. If you notice a spike in January or February, or if a room over a garage or at the end of a duct run never reaches temperature when the heat is running, that's the time to call. Spring and fall are ideal for scheduling because the weather is mild and the attic or crawl space is easier to work in. Summer cooling bills can also spike if your attic and rim joists are poorly sealed, because the air conditioning has to work harder to cool a home with hot attic air leaking into the living space. Call (534) 444-6239 to schedule an assessment and get a written estimate.
Why choose us?

Trusted professionals since 2012

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Eau Claire

All your work handled by qualified professionals in Eau Claire

Attic Spray Foam Insulation

Attic foam that stops Eau Claire's ice dams at the source

Included in your service

  • Roof deck sealed to curb ice dams along Eau Claire eaves
  • Attic plane air sealed at top plates in zone 6A conditions
  • Stops stack effect moisture reaching cold Chippewa Valley roofs
  • Works on Third Ward bungalow and Altoona subdivision attics alike
Learn more→

Closed Cell Spray Foam Insulation

Dense closed cell foam built for Eau Claire's cold basements

Included in your service

  • Closed cell foam applied along full basement rim joists
  • Seals cold air settling off the Chippewa River each winter
  • Adds structural rigidity for older Third Ward foundation walls
  • Blocks condensation risk common in zone 6A basement cavities
Learn more→

Open Cell Spray Foam Insulation

Open cell fill for Eau Claire's uneven old wall cavities

Included in your service

  • Fills stud cavities in Third Ward and downtown wall framing
  • Expands fully in mid-century ranch walls across Eau Claire
  • Cuts drafts tied to Chippewa Valley winter stack effect
  • Dampens sound in newer Altoona and Lake Hallie subdivisions
Learn more→

Wall & Injection Foam Insulation

Injection foam for finished walls across Eau Claire County

Included in your service

  • Small injection holes drilled in Third Ward lath and plaster
  • Fills gaps left in mid-century Eau Claire wall framing
  • No demolition needed on finished downtown bungalow walls
  • Adds coverage before another Chippewa Valley heating season
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for Eau Claire's cold, damp foundations

Included in your service

  • Foam sealed along crawl space walls near full basement areas
  • Cuts cold floor drafts common in Eau Claire winters
  • Blocks moisture at band joists in Dunn county crawl spaces
  • Addresses condensation risk typical of zone 6A foundations
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist foam for every Eau Claire full basement

Included in your service

  • Rim and band joists foamed at the foundation top plate
  • Blocks cold air settling off the Chippewa River in winter
  • Fits full basements found under nearly every Eau Claire home
  • Cuts condensation risk common to zone 6A rim joist cavities
Learn more→

Garage Spray Foam Insulation

Garage foam that warms rooms over garages near Altoona

Included in your service

  • Garage ceiling foam under bonus rooms in Lake Hallie homes
  • Seals garage walls against Eau Claire winter cold
  • Evens out temperatures in rooms over Altoona subdivisions
  • Cuts drafts tied to zone 6A heating season demand
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam for Chippewa Valley pole barns

Included in your service

  • Foam applied to metal panels in Chippewa Valley pole barns
  • Controls condensation on barndominium roof purlins here
  • Keeps shops usable through long Eau Claire winters
  • Handles wide seasonal swings across the surrounding counties
Learn more→

Commercial & New Construction Spray Foam

Commercial and new build foam across the Chippewa Valley

Included in your service

  • Foam scheduled around framing stages on Eau Claire builds
  • Covers commercial sites across Chippewa and Dunn counties
  • Fits new subdivisions reaching toward Altoona and Lake Hallie
  • Free estimates for zone 6A new construction projects
Learn more→

Insulation Removal

Clearing out old insulation across Eau Claire homes

Included in your service

  • Old insulation cleared from Third Ward attic spaces
  • Removal from basements common under Eau Claire homes
  • Clears settled material from mid-century ranch walls
  • Prepares attics for new foam before winter heating season
Learn more→

Insulation Replacement & Re-Insulation

Fresh foam insulation for Eau Claire's older housing stock

Included in your service

  • New foam installed in Third Ward attic spaces
  • Re-insulated rim joists under full Eau Claire basements
  • Replaces uneven fill in mid-century Chippewa Valley walls
  • Closes gaps tied to zone 6A heating season losses
Learn more→

Air Sealing

Air sealing that targets Eau Claire's stack effect losses

Included in your service

  • Top plates sealed against Eau Claire stack effect drafts
  • Rim joist penetrations closed in full basement foundations
  • Reduces ice dam risk from Randall Park to Lake Hallie
  • Blower door tested results for zone 6A homes
Learn more→
Verified client reviews

28+ Verified Client Reviews in Eau Claire

⭐⭐⭐⭐⭐ 4.9/5 · 28 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Eau Claire · Response within 24h · No commitment · ☎ (534) 444-6239

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Eau Claire ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm