Serving the Eau Claire area  ·  (534) 444-6239  ·  Open Mon-Sat 7am-6pm
📞 (534) 444-6239 Free Quote

Spray Foam Insulation in Augusta, WI (54722) · Local Professionals

Eau Claire Spray Foam Insulation · Fast response in Augusta and the Eau Claire area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+28Verified Reviews
14Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Augusta sits on the Chippewa River valley floor, where older homes with full basements and mid-century ranches make up most of the residential stock, and where winter cold settles hard against foundation walls while summer humidity swings wide. Spray foam insulation in Augusta is not optional, it is essential.

Homeowners in Augusta (54722) call Eau Claire Spray Foam Insulation because rim joists and attics in this climate leak air and moisture year-round, heating and cooling bills climb fast, and the local expertise matters. We have been serving Augusta and the surrounding Eau Claire area since 2012, and we know the houses here.

Spray Foam Insulation in Augusta (54722)

Augusta's housing runs from early 1900s homes near the river to mid-century ranches spread across town, and nearly every one sits over a full basement. That basement means rim joists and band joists at the foundation top plate are your biggest air leak in winter. Cold off the Chippewa River settles against those foundation walls, and if the rim joist is not sealed, that cold air flows into your living space and your heating bill climbs. Attics carry the second major leak. In this cold climate zone, warm humid air rises by stack effect through your home, and where the attic is poorly sealed at top plates and around penetrations, that moisture meets cold roof sheathing and drives ice dams along the eaves. Wall cavities in older homes often carry whatever insulation they were built with, or none at all. Mid-century houses across town frequently hide cavities filled unevenly or with settling material. Humid summers add their own load, and rooms over garages or at the end of a duct run often never reach temperature.

Our team has been sealing and insulating homes in Augusta and the Eau Claire area since 2012. We understand the building stock here, the climate, and what it takes to stop the leaks that drive your bills up.

Our services in Augusta

How a Job Works in Augusta

We start with a free on-site assessment. We walk your attic, crawl space, or rim joist area, measure what needs to be sealed and insulated, and discuss whether open cell or closed cell foam makes sense for your space and budget. We provide a written estimate that includes R-value and thickness specifications so you know exactly what you are paying for.

On the work day, our fully insured crew sets up mechanical ventilation to manage the spray application and cure. If old insulation or contaminated material has to come out first, we handle that before any foam goes in. We spray to the thickness and R-value on your estimate, controlling the application so the foam cures properly and evenly. Once the foam is cured, we seal penetrations and clean up the work area. In an occupied home, we advise on a re-entry window of twenty-four to forty-eight hours, depending on ventilation and the foam type we used.

We leave your property clean and walk through the finished work with you so you understand what was done and why.

Attic spray foam in Augusta typically starts at $1.50 per square foot for open cell or closed cell, depending on your R-value target and the thickness required by code at your address. Wall and injection foam retrofit runs from $2 per square foot. Crawl space foam starts at $2,500 and often requires moisture assessment first. Rim joist and band joist sealing starts at $650 and is one of the fastest paybacks in heating season. If old insulation has to come out, removal runs from $950. The final cost depends on the area to cover, the R-value and thickness you need, the foam type that fits your use, and whether contaminated or wet insulation has to be removed first. Call us at (534) 444-6239 for a free on-site estimate. We will measure your spaces, walk you through the options, and give you a firm price in writing.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Augusta and nearby areas.

We live in an older Augusta home near the river, and our basement rim joist gets cold in winter. How does spray foam fix that?
The rim joist is the band of framing that sits on top of your foundation wall, where the basement wall meets the first floor. In older Augusta homes, this area is often open to the basement or poorly insulated, so cold air from the foundation wall flows directly into your living space. Spray foam seals and insulates that rim joist in one step, blocking the cold air path and stopping the draft. It is one of the most cost-effective improvements you can make in a basement-foundation home like yours, and you will feel the difference in the first heating season.
We have condensation and damp insulation visible in our attic. Can we just spray foam over it?
No. Wet or contaminated insulation has to come out before any foam goes in. Spray foam applied over moisture will trap that moisture and create a bigger problem. We assess your attic moisture first, identify the source (a roof leak, poor ventilation, or stack effect from below), and either fix the moisture issue or walk away. If the old insulation is damp or contaminated, we remove it, dry the space if needed, and then spray the foam. That is the honest way to do it. Call us at (534) 444-6239 to schedule an attic inspection.
What is a realistic price to insulate an attic in Augusta with spray foam?
Attic spray foam in Augusta starts at $1.50 per square foot for open cell foam, or from $1.20 per board foot for closed cell, depending on your R-value target and the thickness the code requires at your address. A typical 1,000-square-foot attic might run $1,500 to $3,000 or more, depending on whether old insulation has to be removed first, how much sealing is needed at the top plates and around penetrations, and whether you choose open or closed cell. The best way to know is a free on-site estimate. Call (534) 444-6239.
Who decides the R-value and thickness we need in our Augusta attic, and who inspects the work?
The energy code and building code in force at your address set the R-value requirement, and the building official for Augusta enforces it. Attic ventilation, ignition barriers, and thermal barriers are all governed by code. We follow the code that applies to your house, and we include the R-value and thickness on your written estimate so you and the building official can verify the work. Permits and inspection requirements vary by city across the Eau Claire area, so we help you navigate what applies at your address and coordinate with the local building department.
We are planning to have spray foam applied to our Augusta home while we are still living here. What should we expect?
We set up mechanical ventilation during the spray and cure to manage odor and off-gassing. Once the foam is cured, typically twenty-four to forty-eight hours depending on the foam type and ventilation, the space is safe to occupy. We will advise you on a re-entry window before we start, so you know when the room or attic is ready. If you have an HOA or property line concerns, let us know and we will coordinate with your neighbors. We leave the property clean.
Are you insured for spray foam work in Augusta?
Yes. We are fully insured with general liability and workers' compensation coverage. Before you hire any spray foam contractor, always verify their insurance directly with their carrier. We are happy to provide proof of coverage.
When is the best time to spray foam an attic or rim joist in Augusta?
Fall and early winter are the busiest seasons because homeowners feel the cold and see their heating bills climb. Late spring and summer are quieter, and scheduling is easier. However, the real answer is that if your rim joist is leaking cold air or your attic is condensating and damp, the best time is now. Waiting for the perfect season costs you money every month in heating or cooling that escapes. Call (534) 444-6239 to schedule an assessment and we will help you plan the work around your calendar and your budget.
Why choose us?

Trusted professionals since 2012

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Eau Claire

All your work handled by qualified professionals in Eau Claire

Attic Spray Foam Insulation

Attic foam that stops Eau Claire's ice dams at the source

Included in your service

  • Roof deck sealed to curb ice dams along Eau Claire eaves
  • Attic plane air sealed at top plates in zone 6A conditions
  • Stops stack effect moisture reaching cold Chippewa Valley roofs
  • Works on Third Ward bungalow and Altoona subdivision attics alike
Learn more→

Closed Cell Spray Foam Insulation

Dense closed cell foam built for Eau Claire's cold basements

Included in your service

  • Closed cell foam applied along full basement rim joists
  • Seals cold air settling off the Chippewa River each winter
  • Adds structural rigidity for older Third Ward foundation walls
  • Blocks condensation risk common in zone 6A basement cavities
Learn more→

Open Cell Spray Foam Insulation

Open cell fill for Eau Claire's uneven old wall cavities

Included in your service

  • Fills stud cavities in Third Ward and downtown wall framing
  • Expands fully in mid-century ranch walls across Eau Claire
  • Cuts drafts tied to Chippewa Valley winter stack effect
  • Dampens sound in newer Altoona and Lake Hallie subdivisions
Learn more→

Wall & Injection Foam Insulation

Injection foam for finished walls across Eau Claire County

Included in your service

  • Small injection holes drilled in Third Ward lath and plaster
  • Fills gaps left in mid-century Eau Claire wall framing
  • No demolition needed on finished downtown bungalow walls
  • Adds coverage before another Chippewa Valley heating season
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for Eau Claire's cold, damp foundations

Included in your service

  • Foam sealed along crawl space walls near full basement areas
  • Cuts cold floor drafts common in Eau Claire winters
  • Blocks moisture at band joists in Dunn county crawl spaces
  • Addresses condensation risk typical of zone 6A foundations
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist foam for every Eau Claire full basement

Included in your service

  • Rim and band joists foamed at the foundation top plate
  • Blocks cold air settling off the Chippewa River in winter
  • Fits full basements found under nearly every Eau Claire home
  • Cuts condensation risk common to zone 6A rim joist cavities
Learn more→

Garage Spray Foam Insulation

Garage foam that warms rooms over garages near Altoona

Included in your service

  • Garage ceiling foam under bonus rooms in Lake Hallie homes
  • Seals garage walls against Eau Claire winter cold
  • Evens out temperatures in rooms over Altoona subdivisions
  • Cuts drafts tied to zone 6A heating season demand
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam for Chippewa Valley pole barns

Included in your service

  • Foam applied to metal panels in Chippewa Valley pole barns
  • Controls condensation on barndominium roof purlins here
  • Keeps shops usable through long Eau Claire winters
  • Handles wide seasonal swings across the surrounding counties
Learn more→

Commercial & New Construction Spray Foam

Commercial and new build foam across the Chippewa Valley

Included in your service

  • Foam scheduled around framing stages on Eau Claire builds
  • Covers commercial sites across Chippewa and Dunn counties
  • Fits new subdivisions reaching toward Altoona and Lake Hallie
  • Free estimates for zone 6A new construction projects
Learn more→

Insulation Removal

Clearing out old insulation across Eau Claire homes

Included in your service

  • Old insulation cleared from Third Ward attic spaces
  • Removal from basements common under Eau Claire homes
  • Clears settled material from mid-century ranch walls
  • Prepares attics for new foam before winter heating season
Learn more→

Insulation Replacement & Re-Insulation

Fresh foam insulation for Eau Claire's older housing stock

Included in your service

  • New foam installed in Third Ward attic spaces
  • Re-insulated rim joists under full Eau Claire basements
  • Replaces uneven fill in mid-century Chippewa Valley walls
  • Closes gaps tied to zone 6A heating season losses
Learn more→

Air Sealing

Air sealing that targets Eau Claire's stack effect losses

Included in your service

  • Top plates sealed against Eau Claire stack effect drafts
  • Rim joist penetrations closed in full basement foundations
  • Reduces ice dam risk from Randall Park to Lake Hallie
  • Blower door tested results for zone 6A homes
Learn more→
Verified client reviews

28+ Verified Client Reviews in Eau Claire

⭐⭐⭐⭐⭐ 4.9/5 · 28 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Eau Claire · Response within 24h · No commitment · ☎ (534) 444-6239

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Eau Claire ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm