Serving the Eau Claire area  ·  (534) 444-6239  ·  Open Mon-Sat 7am-6pm
📞 (534) 444-6239 Free Quote

Spray Foam Insulation in Bloomer, WI (54724) · Local Professionals

Eau Claire Spray Foam Insulation · Fast response in Bloomer and the Eau Claire area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+28Verified Reviews
14Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Bloomer sits in the heart of the Chippewa Valley, where older farmhouses, pole barns and newer residential builds all face the same long, punishing winters. Most homes here are built over basements or crawl spaces, with attics that run hot and cold depending on the season, and rim joists at the foundation that leak cold air straight into living spaces when the temperature drops.

Eau Claire Spray Foam Insulation has been serving Bloomer (54724) and the surrounding area since 2012. We know the construction here, the moisture challenges that come with our climate, and what it takes to stop the heat loss and drafts that drive up heating bills every January through March. When a Bloomer homeowner or property manager needs spray foam insulation or air sealing done right, they call us.

Spray Foam Insulation in Bloomer (54724)

Bloomer's housing stock ranges from early-1900s farmhouses to mid-century ranches and newer suburban builds, nearly all of them sitting over basements or crawl spaces. That foundation design means rim joists and band joists at the top of the foundation wall are a weak point every single winter. Cold air settles against those uninsulated cavities, and the heat loss is real and measurable on your heating bill. Attics are the other major leak: in IECC zone 6A, warm humid indoor air rises by stack effect, and where the attic plane is poorly sealed at top plates, ductwork penetrations and eaves, that moisture meets cold roof sheathing and drives ice dams along the roofline. Wall cavities in older homes often carry whatever insulation was installed decades ago, or none at all. Pole barns and agricultural buildings throughout the Chippewa Valley face the same temperature swings, and rooms over garages are notorious for never reaching comfortable temperature while the heating bill climbs.

Our team has been insulating and air sealing homes, barns, metal buildings and commercial spaces across Bloomer and the Eau Claire area for over a decade. We spray closed cell and open cell foam, inject foam into walls, remove failed insulation, and seal the air leaks that turn a good insulation job into a real one. We show up on time, work clean, and leave your property the way we found it.

Our services in Bloomer

How a Job Works in Bloomer

It starts with a call to (534) 444-6239. We schedule a free on-site assessment at your property in Bloomer. We walk the attic, crawl space, rim joists or walls, measure the areas to be sprayed, and talk through what you're seeing: cold spots, high heating bills, moisture, or insulation that has to come out first. We explain what needs to happen and what it will cost, with no surprises and no pressure.

On the day of the work, our fully insured crew arrives with equipment and materials. We prep the space, protect what needs protecting, and spray the foam to the thickness and R-value specified in your estimate. If there is old insulation to remove first, we haul it out and dispose of it properly. We set up mechanical ventilation during the cure, and we tell you plainly when the space is ready to re-enter, typically twenty-four to forty-eight hours after the work is done. If you are living in the house during the work, we coordinate the schedule and explain the re-entry window upfront.

When the foam has cured, we do a final walkthrough with you, confirm that the job matches the estimate, and clean up. Your property is left clean and ready to use.

Pricing for spray foam insulation in Bloomer depends on the area to cover, the thickness and R-value you need, whether you are using open cell or closed cell foam, and what insulation or debris has to be removed first. An attic foam job in a typical Bloomer home runs from $1.50 per square foot for open cell to $1.20 per board foot for closed cell, depending on depth and coverage. Crawl space work starts around $2,500. Rim joist and band joist sealing, a common and high-impact job in our area, starts at $650. Wall injection foam and insulation removal each have their own scope and cost. The only way to know what your job will cost is a free on-site estimate where we measure, assess what has to happen first, and quote you a firm price with R-value and thickness spelled out. Call us at (534) 444-6239 to schedule yours.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Bloomer and nearby areas.

I live in an older Bloomer farmhouse with a basement. Is my rim joist the place to start?
Almost always, yes. The rim joist and band joist at the top of the foundation wall are the biggest air leak in most older Bloomer homes, and they are the cheapest place to seal first. Cold air flows directly into the basement and up into the living space above. Sealing those cavities with closed cell foam stops the draft and the heat loss. After that, your attic is usually the next priority. Call us at (534) 444-6239 and we will walk you through what makes sense for your house.
I found damp insulation and condensation in my attic last winter. Can you just spray foam over it?
No. Wet or contaminated insulation has to come out first. We inspect the attic, identify where the moisture is coming from, and remove the old insulation. Once the cavity is clean and dry, we spray the foam. If there is a roof leak or active water intrusion, that has to be fixed before any foam goes in. We assess the situation honestly and tell you what comes first. Call (534) 444-6239 to schedule an inspection.
How much will it cost to spray foam my attic in Bloomer?
Attic spray foam in Bloomer typically runs from $1.50 per square foot for open cell to higher for closed cell, depending on the R-value you need and the thickness required by code. A 1,000 square foot attic might range from $1,500 to $2,500 or more, depending on those factors and whether old insulation has to be removed first. The only way to get a real number is a free on-site estimate. We measure your space, confirm the R-value and thickness that applies at your address, and quote you a firm price. Call (534) 444-6239.
Who decides what R-value and thickness I need for my attic in Bloomer, and who inspects the work?
The energy code and building code in force at your address set the R-value requirement. The building official at Chippewa County enforces it and inspects the work. Ignition barriers and thermal barriers are also governed by code and by the building official, not by us. We follow what the code requires at your property, and we specify the R-value and thickness in your written estimate so there is no confusion. If you have questions about what applies to your house, the Chippewa County official site at https://www.chippewacountywi.gov is the place to verify permit and inspection requirements.
I have a pole barn and a metal building on my Bloomer property. Can you spray foam both?
Yes. We spray closed cell and open cell foam in metal buildings, pole barns, and barndominiums throughout the Chippewa Valley. Metal buildings see extreme temperature swings and need robust insulation and air sealing to stay comfortable and protect what is stored inside. Closed cell foam is the standard choice for agricultural and metal building work because it handles the moisture and temperature swings. Our fully insured crews have the experience and equipment for these jobs. Call (534) 444-6239 for a free estimate on your building.
Are you fully insured for spray foam work at my Bloomer home?
Yes. We carry general liability and workers' compensation insurance. You can verify our coverage before we start work. Insurance protects you and us if something goes wrong, and it is a sign that a contractor is serious about the work. Always ask any spray foam contractor for proof of insurance before they start.
Winter is coming and my heating bills are already climbing. When is the best time to spray foam my attic or rim joist in Bloomer?
Fall and early winter are the busy seasons because homeowners feel the cold and the bills start climbing. If you want the work done before the coldest months, call us now. We can often schedule work within a few weeks. That said, spray foam can be installed year-round, and the work itself takes only a day or two in most cases. The sooner you seal the leaks, the sooner you stop losing heat. Call (534) 444-6239 to schedule your free estimate and get on the calendar.
Why choose us?

Trusted professionals since 2012

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Eau Claire

All your work handled by qualified professionals in Eau Claire

Attic Spray Foam Insulation

Attic foam that stops Eau Claire's ice dams at the source

Included in your service

  • Roof deck sealed to curb ice dams along Eau Claire eaves
  • Attic plane air sealed at top plates in zone 6A conditions
  • Stops stack effect moisture reaching cold Chippewa Valley roofs
  • Works on Third Ward bungalow and Altoona subdivision attics alike
Learn more→

Closed Cell Spray Foam Insulation

Dense closed cell foam built for Eau Claire's cold basements

Included in your service

  • Closed cell foam applied along full basement rim joists
  • Seals cold air settling off the Chippewa River each winter
  • Adds structural rigidity for older Third Ward foundation walls
  • Blocks condensation risk common in zone 6A basement cavities
Learn more→

Open Cell Spray Foam Insulation

Open cell fill for Eau Claire's uneven old wall cavities

Included in your service

  • Fills stud cavities in Third Ward and downtown wall framing
  • Expands fully in mid-century ranch walls across Eau Claire
  • Cuts drafts tied to Chippewa Valley winter stack effect
  • Dampens sound in newer Altoona and Lake Hallie subdivisions
Learn more→

Wall & Injection Foam Insulation

Injection foam for finished walls across Eau Claire County

Included in your service

  • Small injection holes drilled in Third Ward lath and plaster
  • Fills gaps left in mid-century Eau Claire wall framing
  • No demolition needed on finished downtown bungalow walls
  • Adds coverage before another Chippewa Valley heating season
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for Eau Claire's cold, damp foundations

Included in your service

  • Foam sealed along crawl space walls near full basement areas
  • Cuts cold floor drafts common in Eau Claire winters
  • Blocks moisture at band joists in Dunn county crawl spaces
  • Addresses condensation risk typical of zone 6A foundations
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist foam for every Eau Claire full basement

Included in your service

  • Rim and band joists foamed at the foundation top plate
  • Blocks cold air settling off the Chippewa River in winter
  • Fits full basements found under nearly every Eau Claire home
  • Cuts condensation risk common to zone 6A rim joist cavities
Learn more→

Garage Spray Foam Insulation

Garage foam that warms rooms over garages near Altoona

Included in your service

  • Garage ceiling foam under bonus rooms in Lake Hallie homes
  • Seals garage walls against Eau Claire winter cold
  • Evens out temperatures in rooms over Altoona subdivisions
  • Cuts drafts tied to zone 6A heating season demand
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam for Chippewa Valley pole barns

Included in your service

  • Foam applied to metal panels in Chippewa Valley pole barns
  • Controls condensation on barndominium roof purlins here
  • Keeps shops usable through long Eau Claire winters
  • Handles wide seasonal swings across the surrounding counties
Learn more→

Commercial & New Construction Spray Foam

Commercial and new build foam across the Chippewa Valley

Included in your service

  • Foam scheduled around framing stages on Eau Claire builds
  • Covers commercial sites across Chippewa and Dunn counties
  • Fits new subdivisions reaching toward Altoona and Lake Hallie
  • Free estimates for zone 6A new construction projects
Learn more→

Insulation Removal

Clearing out old insulation across Eau Claire homes

Included in your service

  • Old insulation cleared from Third Ward attic spaces
  • Removal from basements common under Eau Claire homes
  • Clears settled material from mid-century ranch walls
  • Prepares attics for new foam before winter heating season
Learn more→

Insulation Replacement & Re-Insulation

Fresh foam insulation for Eau Claire's older housing stock

Included in your service

  • New foam installed in Third Ward attic spaces
  • Re-insulated rim joists under full Eau Claire basements
  • Replaces uneven fill in mid-century Chippewa Valley walls
  • Closes gaps tied to zone 6A heating season losses
Learn more→

Air Sealing

Air sealing that targets Eau Claire's stack effect losses

Included in your service

  • Top plates sealed against Eau Claire stack effect drafts
  • Rim joist penetrations closed in full basement foundations
  • Reduces ice dam risk from Randall Park to Lake Hallie
  • Blower door tested results for zone 6A homes
Learn more→
Verified client reviews

28+ Verified Client Reviews in Eau Claire

⭐⭐⭐⭐⭐ 4.9/5 · 28 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Eau Claire · Response within 24h · No commitment · ☎ (534) 444-6239

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Eau Claire ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm